Coating condensers with graphene could increase power plant efficiency

mit-graphene-power-plant-efficiency

Coating condenser tubes in graphene (right) significantly improves efficiency over existing methods (left)

Research conducted by a team of MIT scientists suggests that applying a layer of graphene to power plant condensers could significantly improve efficiency. Early testing indicates that use of the material is vastly superior to current methods, and its application could lead to huge monetary savings, as well as a positive impact on the climate.

The majority of power plants generate electricity by using steam to turn a turbine, with that steam then turned back into water to allow the process to start again. The MIT scientists believe that they’ve found a method of improving the efficiency of the condensers that collect the steam, and it could make a big difference to overall power plant efficiency.

The research focuses on improving condensers that collect water in thin sheets, covering their surfaces. Looking at how that film of liquid impedes heat transfer, the team decided to search for a way of improving water droplet formation on the surface of the condensers, thereby improving efficiency. Water-repellent polymer coatings are often used for this purpose, but they’re far from an ideal solution, often degrading quickly in the humid conditions of the plant.

To find a better alternative, the team turned to graphene – a very strong, conductive material that’s known to be hydrophobic. Both the ability of the material to shed water and its durability were tested in an environment of pure water vapor at 100 ºC (212 ºF) – the exact conditions you’d find in an active power plant.

The results showed that the graphene coating improved the rate of heat transfer by a factor of four, and further calculations indicated that optimization could lead to improvements of five to seven times that of existing methods. Furthermore, after two full weeks of testing, there were no signs of degradation.

Improvements to large scale chemical vapor deposition (CVP) graphene production, such as that recently unveiled by MIT, will be instrumental in the potential use of graphene in power plants. In fact, the team believes that the new method could be ready for real world testing in as little as a year.

It’s thought that the condenser improvements could lead to an overall power planet efficiency bump of 2 to 3 percent, translating to millions of dollars per power plant per year. Given the vast number of power plants that make use of condensers, that could translate into a big positive impact on global carbon emissions.

References:http://www.gizmag.com/

Could “brainprints” replace passwords, fingerprints and retinal scans?

brainprint-security

The brain waves that result in response to certain words could be used to verify a person’s identity

Passwords are the bane of many a computer user’s existence. Experts recommend long strings of characters containing a mix of upper and lowercase letters, numbers and symbols that may be difficult to crack, but can also be difficult to remember. Despite there being simple techniques for creating difficult-to-crack passwords that are easy to remember and horror stories of identify theft abound, the top two most common passwords remain “12345” and “password”. But a study out of Binghampton University (BU) in New York suggests brainwaves could be a promising alternative to verify a user’s identity.

Researchers at BU read a list of 75 acronyms, such as FBI and DVD, to 45 volunteers and observed the brainwaves that resulted from each group of letters, focusing on the part of the brain associated with reading and recognizing words. This was done with the placement of just three electrodes on the scalp, which is the minimum number that can be used and still obtain a clean reading.

While each respondent’s brainwaves exhibited identifiable features that were consistent in response to a given acronym, the reactions – or “brainprints” – were different enough between respondents to allow a computer system to identify each volunteer with an accuracy of 94 percent. These results were also stable over time, with identification possible after a lag of up to six months.

Sarah Laszlo, assistant professor of psychology and linguistics at BU and study co-author, says that brain biometrics offer a number of advantages over other physical characteristics used for biometrics, such as fingerprints or retinas. For example, both of these can be stolen by malicious means, rendering them unusable by the user since they can’t be replaced.

“If someone’s fingerprint is stolen, that person can’t just grow a new finger to replace the compromised fingerprint – the fingerprint for that person is compromised forever,” points out Laszlo. “Fingerprints are ‘non-cancellable.’ Brainprints, on the other hand, are potentially cancellable. So, in the unlikely event that attackers were actually able to steal a brainprint from an authorized user, the authorized user could then ‘reset’ their brainprint.”

While the researchers don’t see brainprints as a potential replacement for passwords for low security applications in the near future – after all, who wants to hook themselves up to an electroencephalograph (EEG) just to log into their email – they do see the technology having potential in high security environments.

“We tend to see the applications of this system as being more along the lines of high-security physical locations, like the Pentagon or Air Force Labs, where there aren’t that many users that are authorized to enter, and those users don’t need to constantly be authorizing the way that a consumer might need to authorize into their phone or computer,” says Zhanpeng Jin, assistant professor at Binghamton University’s departments of Electrical and Computer Engineering, and Biomedical Engineering.

The team’s study appears in the journal Neurocomputing.

References:http://www.gizmag.com/

Intel announces Thunderbolt 3 with USB-C connector, double the bandwidth

intel-thunderbolt

Adopting USB-C means that Thunderbolt 3 will feature a reversible connector, a welcome feature

Intel has unveiled its third generation Thunderbolt interface, shedding its loyal Mini DisplayPort connector in favor of the nascent USB-C format. Further to offering greater degrees of versatility when hooking up peripherals, Thunderbolt 3 beefs up bandwidth from 20 Gbps of the second generation to 40 Gbps and can pipe power to your devices at the same time.

Apple raised its share of eyebrows when it announced a new MacBook bearing only a single port earlier this year. This feature was met with a healthy amount of intrigue, or even scepticism, but hinted at a future where less might mean much more when it comes to plugging things into your machine. Intel’s announcement at the Computex conference in Taipei on Tuesday gives this vision a nice little nudge along, in essence promising a single standard capable of serving everybody from the casual user to professionals that deal in huge data transfers.

Adopting USB-C means that Thunderbolt 3 will feature a reversible connector. It can deliver two 4K displays running at 60 Hz and charge your device with up to 100 W of power transfer. It incorporates support for DisplayPort 1.2 and USB 3.1, meaning that existing USB-C cables can still be accommodated, though data transfer will top out at 10 Gbps.

These combine for a pretty impressive list of specs, but Thunderbolt 3’s most profound impact may prove to be an ushering in of widely useful single-port machines. With the relatively small USB-C connector that is finding newly compatible devices all the time, this could extend to ever-slimming phones and tablets to send tangled webs of cables the way of the compact disc.

Intel plans to begin shipping Thunderbolt 3 products before the end of this year.

References:http://www.gizmag.com/

Scientists come a step closer to “regrowing” limbs

decellularization-rat-limb-transplant

The decellularized rat forelimb is injected with muscle and vascular cells

Currently, recipients of arm or leg transplants need to take immunosuppressive drugs for the rest of their lives, in order to keep the donated parts from being rejected. If we could grow our own replacement limbs, however, that wouldn’t be necessary. And while we do already possess the progenitor cells needed to grow such parts, what’s been lacking is a method of assembling them into the form of the desired limb. Now, however, scientists have created a shortcut of sorts – they’ve stripped the cells from one rat’s forelimb and replaced them with live cells from another rat, creating a functioning limb that the second rat’s immune system won’t reject.

Led by Dr. Harald Ott, a team at the Massachusetts General Hospital started by perfusing the donor limb with a detergent that stripped away all of its living cells. After the cellular debris was removed, all that remained was the empty non-living extracellular matrix that formerly contained the cells.

As this task was in process, progenitor cells from the recipient rat were being being grown in culture to produce muscle and vascular cells.

Once the limb was stripped of its original cells, it was placed in a nutrient solution-filled bioreactor and injected with the lab-grown cells – the muscle cells went into the individual muscle sheath sections of the matrix, while the vascular cells went into the main artery. After five days of being in the reactor, electric stimulation was applied to help the muscles grow. Two weeks later, upon being removed from the reactor, the limb was found to have functioning muscle cells in the muscle fibers and live vascular cells in the blood vessel walls.decellularization-rat-limb-transplant-3

When the muscles were activated using electrical stimulation, they were found to have 80 percent the strength of a newborn rat’s forelimb muscles. Additionally, when the limb was transplanted onto the recipient rat, its blood vessels soon filled with blood and became part of the circulatory system.

Ott and his team are now looking at ways of regrowing other limb tissues such as bone, cartilage and connective tissue. The regrowth of nerves should hopefully happen on its own. “In clinical limb transplantation, nerves do grow back into the graft, enabling both motion and sensation, and we have learned that this process is largely guided by the nerve matrix within the graft,” he says. “We hope in future work to show that the same will apply to bioartificial grafts.”

The decellularization technique utilized by the Massachusetts scientists, incidentally, has previously been used to create transplantable mouse hearts and rat kidneys. However, this is the first time that it’s been used for something more complex than an organ. The scientists have also decellularized a baboon forearm, indicating that the procedure could work on primates.

References:http://www.gizmag.com/